Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11143645 Review Video

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

According to my research, the Toyota Highlander doesn't have the connector under the dash to install a brake controller. In order to install your brake controller, you'll need to hardwire the controller using our Brake Controller…

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

This sounds like a ground issue. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. Make sure that the vehicle side and…

Trailers use a combined wiring system meaning the brake lights and turn signals are on the same circuits. Since the brake lights are working on the trailer, and because you have tested the vehicle wiring and it is working properly, there is most…

Yes, trailer wiring harness #C56332 does have a fuse in a red holder near the large black converter box. If that fuse is fine, then use the vehicle owner's manual to find any fuses related to tow package wiring on the vehicle to check them. If…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

I would be happy to help you. All three of the wiring harnesses, the Curt item #C56033, Hopkins item #HM11143645, and the Tekonsha item #118480, fit your 2018 Nissan Rogue. I always recommend the Tekonsha wiring harness because they are built better…

If you have the 2017 Nissan Rogue the trailer hitch I recommend is the Draw-Tite #75902. This is a Class lll hitch and it has a 2-inch receiver opening. This is a custom fit hitch and requires no drilling for installation. If you have the Rogue…

For your 2017 Nissan Rogue, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75902. This is a Class III trailer hitch that has a 3,500 pound towing capacity and 350 pound tongue weight capacity, although I also recommend checking your…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer.com Trailer Hitch Receiver #E98846 that fits your 2017 Nissan Rogue uses M12-1.25 x 35mm hex bolts, which are included with the hitch. I have added a link to a video showing this hitch being installed on a '17 Rogue as well as a link…