Review of Furrion Replacement Glass Oven Door Black - 715326 Video

The Replacement Glass Oven Door for Furrion 2-in-1 Range Oven #715326 for the Furrion 2-in-1 Range Oven with Glass Cover FSRE17SABL, which is no longer available is actually slightly different than the: -Replacement Stainless Steel Oven Door for…

We were able to get the dimensions for you of the replacement door you asked about: - Replacement Glass Oven Door for Furrion 2-in-1 Range Oven - Black #715326. This door measures 21-3/8” wide x 11-3/4” tall by 1-1/4” thick. I have added a cut out…

I'd be happy to provide those for you. The #FR52FR replacement oven door measures 21-7/8 x 11-3/4 x 3-5/8 inches thick (including the handle). I've shown these dimensions on a photo for you.

We have the Replacement Glass Oven Door for Furrion 2-in-1 Range Oven in Black, #715326. And in Stainless Steel for 17" Ovens, #FR52FR. If you have the 21" the one you will need #FR79ZR.

In order to find the model number on the Furrion 2-in-1 Range Oven part #FSRE21SABL you will need to pull this out away from the cabinets and then look on the left hand side of the unit for a white sticker with barcode which should then display the…

Hey John, the closest Furrion oven door we offer to what you mentioned would be the part #FR66NR which is for the 21 inch Furrion 2 in 1 range ovens. The door is black and has a silver handle like you mentioned but it measures 21-3/8" long x…

Hey John, I looked up the range hood you have and since it is 22 inches wide you could use the Ventline part #VE88SR as a replacement since it is the same size.

Yes the stainless #FR52FR is the same as the black part #715326 so they are interchangeable.

The first step to troubleshooting anything electrical is to test the voltage and ensure that it's properly grounded. I recommend using a tester like #PT89ZR and seeing if the range is actually getting 12v. If not then you'll need to check the…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…