Customers compare EM85PR to these similar products
Products Featured in this Video
Hey, everybody. Welcome to etrailer.com I'm Bobby and today we're taking a look at the Empire Faucets RV Slide bar Handheld Shower Set. Now this unit is gonna allow us to put in a great little shower slide bar in our RVs, that slide bar allows us to quickly adjust our height, which can be great for family or friends of varying Heights that are taking a shower. To do so right here on the inside, we… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I attached a picture that shows the switch of the Progressive Dynamics converter part #PD4060K which allows you to switch between lead acid and lithium batteries. In case the picture doesn't make it through look on the circuit board near the…
view full answer...The B and W Continuum weight distribution systems like the part #BW78FR that you referenced work the same in cold weather as they do in warmer weather.
view full answer...Yes, the B&W Continuum Weight Distribution System item #BW78FR will work with the Gen-Y Torsion 2-Ball Mount item #325-GH-1226. The Continuum has a tongue weight range of 600 lbs - 1,600 lbs so you will be limited to 1,500 lbs of tongue weight…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR for 2" or part #BW28FR for 2.5" is going to be your best option for a toy hauler trailer like a Grand Design Momentum 31G since the tongue weight can vary heavily based on loaded…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…
view full answer...I don't think the Shocker Air Equalizer for Weight Distribution Hitch part #SHK68VR would be compatible with the B&W Continuum Weight Distribution System part #BW78FR due to a few reasons, clearance being one but this is also not something…
view full answer...That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…
view full answer...11 inches from the bolt hole centers to the wall of the RV is the standard dimension for installing a 2 bolt toilet like the Dometic part #DOM87FR. You might check again and see if you didn't measure from the bolt centers and instead did from the…
view full answer...As far as lumen output the Optronics LED RV Interior Light #RVILL34 has 2 ratings. The raw output, unobstructed and in testing conditions the light can produce 920 lumen. The effective lumen output in real-world scenarios is 815 lumen. But the watts…
view full answer...According to Empire faucet, the #EM62FR shower valve can be installed so the output nozzle is at the bottom.
view full answer...For the wall surrounds, we have two options available. However neither has the exact dimensions you need. Better Bath RV Shower Surround - 40" Wide x 23-5/8" Deep x 57-3/4" Tall - White part #LC306207 Better Bath RV Shower Surround -…
view full answer...