Today were going to review part number DTALBM6600. This is the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount. I want to give you a few specs on this first. This is designed to fit into a two-inch trailer hitch receiver. On the ball platform it does have two different size ball diameters. It has a two-and-5/16 and a two-inch that can be used either way.… see more >
Videos
Help Articles
Expert Answers
Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or…
view full answer...I believe the 7-way on your Ridgeline plugs into a US car connector. You can check this by unplugging the damaged 7-way connector from the wiring harness that plugs into the back of it, and comparing what the connector looks like, compared to the…
view full answer...If your 2008 Honda Ridgeline came with a factory installed 7-Way trailer connector it is possible that #HM40975 will fit. You need to look at the wiring harness that plugs into the back of the factory 7-Way. If it looks the same as the back of…
view full answer...The Erickson Big Hook Ratchet Tie-Down Straps #EM05715 that you referenced have two sizes of hooks. The larger swivel hooks can open enough to accept a 1-inch attachment point. The smaller safety hooks open wide enough for 3/8-inch material.
view full answer...First thing you will need to do is determine how much rise/drop you would need from a ball mount to tow your trailer level. For that you will want to check out the help article that I attached that details how to do this. Once you figure out what you…
view full answer...The Timbren Axle-Less Trailer Suspension System 5200lbs #TASR5200S05 will work on the aluminum frame of your trailer. The easiest way to install the system since you are replacing axles is to add 2x3 tubing between the two axle-less systems to help…
view full answer...The deflection of the Timbren Heavy-Duty Axle-Less Trailer Suspension part #TASR35HDS07 is 2-5/8" which is the amount of travel under load.
view full answer...We offer a replacement 5516 key for Diversi-Tech or Fastway aluminum adjustable ball mounts which is part #DTKEYR5516. Assuming the ball mount is from Diversi-Tech or Fastway, you could also re-key it using the #DTLBM02RK kit. That would be the only…
view full answer...I have a solution for you, but the Pro Series Weight Distribution System part #49570 that you referenced is not recommended for use with surge brakes if you are using a sway control bar like #83660. Instead, for a similar rated system that would be…
view full answer...The Fastway #DTALBM6600 ball mount has two locks, one to secure the ball assembly to the shank, the other to secure the ball mount into the hitch receiver. Both these locks are indeed keyed alike. If you click the provided link, you can see a product…
view full answer...The Timbren Axle-Less Trailer Suspension System With 4" Lift Spindle #TASR5200S03 will have the frame height of 7-5/16" that you found on that product page. The similar 5,200LB Timbren Axle-Less Suspension #ASR5200S01 that has the standard…
view full answer...Technically, there isn't a reason why you couldn't replace your Dexter 3,500 lb axle with a higher-rated one. That being said, that doesn't automatically increase your trailer's weight capacity. You would still be limited by the…
view full answer...