Review of Bolt BOLT Locks - Cylinders - BL7023481 Video

So since it sounds like you have enough of the same keys for your Exo system and just need to swap them out, all you need is the Replacement Control Key for Yakima Same Key System #Y8007835.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

Really it's going to boil down to which spindle type your Bayliner Capri has. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles #AKIHUB-545-35-G-EZ-K will work with 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84…

Thank you for all of the information regarding your towing setup. While we do have suspension enhancement for your 2017 Nissan Titan, you are going to see the most direct benefit by ensuring that your trailer has a tongue weight (TW) that is 10-15%…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

I have attached a dimensional photo of the etrailer E-Track Backing Plates part #e96RR which you can then use to determine compatibility with the Mytee Products e-Track. That said, as we do not carry this product, we cannot confirm fit…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

We have exactly what you need with the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-545-2-G-EZ-2K. This has the 5 on 4-1/2" bolt pattern, uses L44649 inner and outer bearings, and a grease seal with a 1.50" inner diameter.…

I reached out to the manufacturer, Curt, who told me the Curt 7-Way Trailer Plug Extension #C86DR used 14 gauge wire.