Yakima Crossbar Pads Recommendation to Carry a Hobie Kayak

Question

Question:

Can this system carry a Hobie outback kayak weighing in at 90 lbs.?

asked by: Lloyd

0

Expert Reply:

The Yakima Crossbar Pads # Y07413 would have no problem carrying your Hobie kayak, but you will first want to make sure that the roof of the vehicle you plan to carry the kayak has the capacity needed for the 90 lb kayak.

If so, then you would be good to go with this carrier. I attached a review video for you to check out for more info.

expert reply by: Jameson C

0

Answer 1

I checked with Rhino-Rack and the capacity of the Nautic kayak carrier #RR571 is dependent on the capacity of the roof rack on the vehicle. If your roof rack can support 75 pounds then that is what the carrier would be rated for. The carrier itself…

view full answer...

Answer 2

I spoke with my Rhino-Rack contact, who has confirmed that their #RR571 Nautic Kayak Carrier would be compatible with a 2 inch diameter crossbar. I'm assuming you're speaking of a ladder rack with 2 inch round bars. The carrier…

view full answer...

Answer 3

I did some research on your 2021 Hobie Outback, and the hull measures 34 inches wide. For a width of 34 inches, the Malone MegaWing Fishing Kayak Carrier with Tie-Downs #MPG207 will be able to carry it on a crossbar system. If you wish for me to…

view full answer...

Answer 4

Hello again, Dave. It is possible to mount the Yakima Ladder Roller #Y01163 upside down. We would not want the weight of the kayak on the roller during transport, but since you are using it just to load onto the J carriers it will be just fine.

view full answer...

Answer 5

The RetraxPRO XR Hard Tonneau Cover #RTX47SR you found for your 2021 Ford F-150 with the 5-1/2' bed weighs a total of 110lbs. This cover does have the accessory T-Slots in the rails which will accept the Yakima OverHaul HD Adjustable Truck…

view full answer...

Answer 6

Because the Thule Xsporter Pro, part #TH500XTB uses clamps that affix to the inside of the top of the bed side, it would not be compatible with the #BAK39213 BAK Revolver or any tonneau cover, as it also attaches to the inside of the bed side. Also,…

view full answer...

Answer 7

So to answer your first question about what comes with the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868, you have it exactly right - it is the uprights and rails, 68 inch crossbars, and adapter kit for your…

view full answer...

Answer 8

I've got a solution for you, but the Thule Xsporter Pro Truck Bed Ladder Rack #TH500XTB uses clamps to attach to the top and inside of your bed rails, so it is not compatible with the Trax Rails on the RetraxPRO XR #RTT-80373, compatible with…

view full answer...

Answer 9

The T-Rac Pro2 Truck Bed Ladder Rack w/ Over-the-Cab Extension #TH37002XT-EX has a height above the bed rails of 27-1/4 inches. There is not a height adjustment available for the TracRac systems. Since you are having issues with your canoe hitting…

view full answer...

Answer 10

The Yakima round bar roof rack #Y00408, #Y53TR, #Y03536, and #Y00245 that fits your 2021 Chevy Trailblazer with a naked roof does not require any drilling to install as it attaches via fixed mounting points on the roof. I attached a picture that…

view full answer...

Answer 11

Good morning, Donna. So, according to Malone, the #MPG217 roof rack does not fit the factory raised side rails on a 2017 Ford Explorer. I would have to offer you a different roof rack for this vehicle like the Rhino Rack #RR98VE. You can use a Malone…

view full answer...

Yakima Crossbar Pads Recommendation to Carry a Hobie Kayak

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching