How Does Trailer Wiring Install on a 2008 Saab 9-3
Question:
I have a Saab 9-3 aero.2008 and purchased wire kit with hitch. The parking light and brake light are one wire for one of the bulbs. When brake applied, extra current goes to the bulb to make it brighter. I did not get a wire diagram with wire kit. How do I wire it?
asked by: Bruce H
Expert Reply:
I attached a set of installation instructions for the wiring kit you have part # C59496 to the right.
But basically, some vehicles (like yours I believe) combine the stop and taillight functions onto one circuit.
These vehicles will require that you attach the trailer light power module red stop wire to that same circuit on the vehicle and then ground the brown tail light circuit.
Some vehicles combine stop and tail light functions onto 1 circuit and then also have an additional tail light function wire that is independent of the stop. These vehicles will require that you attach the trailer light power module red stop wire to the same combined circuit on the vehicle and then attach the brown tail light circuit to the independent circuit on the vehicle.
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Troubleshooting 2017 Toyota Tacoma Sending Power Only to Trailer Right Side Tail Lights
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Wiring Harness for 2024 Honda Odyssey EX-L
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Hitch for a 2024 Toyota Venza
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
Zak
5/25/2020
I'm looking to install a a towing package on my Saab 9-3 2008 2.0 Turbo four cylinder sedan I need all accessories and clarification on wiring harness also wondering if I need a separate wiring harness for the brakes on the trailer and I need it tow hitch can you help me possibly find a package that has all of these together with wiring diagrams Etc and clear up if I need one wiring harness or two I don't know if one is for the lights and one is for the brakes or if they're both in the same way we harness please and thanks