Parts Needed to Install a 7-Way on a 2005 Ford Explorer
Question:
I have a 1 1/4foot trailer ball mount installed from the factory.Will I need any additional wiring to install this plug on my vehicle?
asked by: Ray W
Expert Reply:
If your 2005 Ford Explorer came originally equipped with a factory 7-way the # part # HM40975 would be all that you would need to install it on your vehicle.
If not, then you would need to start with a 4-way if you don't have one already. For that you would want part # 18252. Now to convert to a 7-way you have two options. If the trailer you plan on towing has trailer brakes you would need part # ETBC7.
If you trailer doesn't have brakes you would instead want the # 37185.
If your trailer has brakes you will need a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure for Trailer Hitch Drop
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Q&A: Parts Needed To Add a Tow Package To a 2024 GMC Canyon
- Q&A: Gooseneck Trailer Hitch for a 1996 Ford F-450
- Q&A: How Does the Hopkins 7-Way part # HM40975 Wire to a Vehicle
- Q&A: Recommended Blue Ox Flat Towing Components For A 2020 Jeep Grand Cherokee Trailhawk