How to Pick Out TorkLift Tie Downs for a 2015 Chevy Silverado 3500

Question

Question:

looking for set of 4 Torklift camper tie downs for2015 3500 silverado factory hitch. Torklift part #c2219 front c3217 rear is that correct?side step stops at rear doo also need to check on fastgun tie downs

asked by: Ron B

0

Expert Reply:

In order to pick out the correct TorkLift tie down brackets more information would be needed from you.

I would need to know bed length, cab style, single or dual real wheel configuration, plus all the information you listed.

Or you can follow the link I attached and will be able to select from our drop down menu the options your truck has and all of the correct tie-downs will be listed.

expert reply by: Jameson C

0

Answer 1

On your 2014 Chevrolet Silverado 2500 HD, when installing the TorkLift Custom Frame-Mounted Camper Tie-Downs, part #TLC2220, and part #TLC3212, there is no drilling required for installation. This tie-down system is designed for trucks with a 6-1/2…

view full answer...

Answer 2

The TorkLift options for your truck are the #TLC2220 for the front and #TLC3215 as long as your steps do not run under the bed. If they end at the cab, then these will work. If they do run under the bed, then instead you will want the HappiJac Custom…

view full answer...

Answer 3

The TorkLift Custom Frame-Mounted Camper Tie-Downs #TLC4204 (front) and #TLC3212 (rear) will fit your dually 2011 Chevy Silverado 3500 Crew Cab with an 8 foot bed, cab-length running boards and a factory hitch. I have added a photo of these tie-downs…

view full answer...

Answer 4

For the TorkLift Custom Frame-Mounted Camper Front Tie-Downs #TLC2220 the 1/2-inch bolt that is to be installed in the hole in the bottom of the front spring perch should be placed using the included coiled bolt fisher wire. Insert the coiled end…

view full answer...

Answer 5

We have Tork Lift tie downs #TLC2220 as the option for the front tie downs on the 2014 Chevy Silverado 2500 short bed. They will fit the following: 6-1/2 Foot Bed Crew Cab without board or step underneath truck bed and without a hitch 6-1/2 Foot Bed…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

How to Pick Out TorkLift Tie Downs for a 2015 Chevy Silverado 3500

Products Referenced in This Question

Continue Researching