Replacement Spindle Washer For 3,500 Lb EZ Lube Spindle
Question:
I ordered replacement electric brakes and brake drum assemblies. Set had everything I needed except for that retainer thingies with tangs in it that you bend a tang up to retain the bearing castle nut. I wound up reusing the old retainers but wonder if you sell replacements? This is for the Dexter 10inch electric brakes with axles that have zerk fittings in them.
asked by: Rick K
Expert Reply:
For a 3,500 lb EZ Lube axle, the replacement spindle washer you will need is part # 5-101. This washer has an inside diameter of 1 inch, so you may want to measure the spindle diameter to be certain.
We do offer other replacement spindle washers, like part # 5-71 for 1-1/2 inch spindles, and part # 5-59, which is for spindles that measure 1-2/4 inches.
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- 1-3/4 Inch Diameter
- 10000 - 15000 lbs
- Washers
- Dexter
more information >
Tang Replacement Spindle Washer
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1-1/2 Inch I.D.
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended 5 on 4-1/2 Lug Trailer Idler Hub For #84 Axle Spindle With E-Z Lube Grease Zerk
- Q&A: Tang Washer Recommendation for Use on Trailer Spindle with L44649 Bearings
- Q&A: Spindle Nut Washer and Grease Seal for a Dexter 3500 Pound E-Z Lube Trailer Axle
- Q&A: Replacement Bearings, Races, Grease Seal and Tang Washer For 7,000LB Axle With Flat Spot on Spindle
- Q&A: Replacement Spindle Washer for an EZ Lube Spindle
- Q&A: Can a Trailer Grease Seal Be Pressed In Too Far Beyond Flush
- Shop: Replacement Trailer Hub Bearing - 14125A
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Video: Bearing Repacking and Grease Seals Installation
- Article: Trailer Wiring Diagrams
- Search Results: bk2~100
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Most Popular Wheel Bearings
- Video: Review of TruRyde Replacement Tang Type Spindle Washer E-Z Lube - 5-101
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Trailer Tire Sizing
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Search Results: l44649
- Shop: Brake Controller
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Search Results: grease