Using Andersen # AM3620 Rapid Jacks Under Wheels of Itasca Navion Motorhome

Question

Question:

Can this be used with a 2014 Itasca Navion motorhome? i am particularly interested in using it with the front wheels rather than the dually. The vehicle has a natural back to front slope and we are always having to drive up on blocks.

asked by: Philip B

0

Expert Reply:

My contact at Andersen tells me that there would be no problem at all with using the # AM3620 Rapid Jack under the front wheels of your motorhome. Click the provided link to see a product video.

expert reply by: Mike L

0

Answer 1

The 225/75-16 tires on your RV have an overall diameter of 29.3" so tire covers for 30" tires are what you will want to use. The Adco Ultra Tyre Gard RV Wheel Covers part #290-3952 for white or part #290-3972 for black are what I…

view full answer...

Answer 2

Yes, you can use the Andersen Rapid Jack #AM3620 on your 2022 Thor Gemini Class Motorhome with dual rear wheels. You can use just one on each side. That being said, if you're going to leave the motorhome on the jack for some time it's…

view full answer...

Answer 3

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 4

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 5

You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on the…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

I spoke to my contact at Kodiak about the issue you are having and he said that sometimes if a trailer braking system is doing way too much of the braking the pressure can get too high for the calipers and they can break (not brake). He said that the…

view full answer...

Answer 9

I do have an option for you but the Ford TPMS for Trailers only works with 15" and smaller trailer wheels due to the valve stem hole size of .452" they use. The valve stem hole size on a 16" and larger trailer wheel like the Westlake…

view full answer...

Answer 10

Yes, the Portable Power Watchdog Surge Protector #HU67FR is the Hughes part number PWD-30-EPO.

view full answer...

Answer 11

The 1.18" width on the Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 is the only size that is offered.

view full answer...

Answer 12

To measure the width of a trailer wheel you will measure from where the tire beads will seat on the wheel. That will be from the inside of the inner wheel flange to the inside of the outer wheel flange, not from edge to edge of the wheel. To measure…

view full answer...

Using Andersen # AM3620 Rapid Jacks Under Wheels of Itasca Navion Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching