Does Nissan Frontier Class III Trailer Hitch 75282 Include Installation Hardware

Question

Question:

On hitch # 75282 2007 Frontier does the installation kit include bolts that fit tha pretapped holes in my frame rails?

asked by: Al

0

Expert Reply:

The Class III # 75282 Draw-Tite Trailer Hitch that you are interested in does comes with the six bolts needed to secure the hitch to the existing weld nuts in the frame. All of our hitches are shipped with the necessary installation hardware.

If you click the provided link, you can view an install video.

expert reply by: Heather A

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this installation…

view full answer...

Answer 2

I think I can help you but we don't have an install video of the Draw-Tite hitch, part #24963, being installed on to a 2019 Hyundai Ioniq. Check out the video I did link. It's for the Curt hitch, part #C11486, that fits the same model years…

view full answer...

Answer 3

The Draw-Tite Hitch item #24963 comes with four M10 X 1.25 X 30 CL10.9 bolts. The best way to prep the weldnuts on your 2018 Hyundai Ioniq is to clean them out with a wire brush. I have linked an installation video below that we did on a 2018 Ioniq…

view full answer...

Answer 4

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Nissan Frontier Class III Trailer Hitch 75282 Include Installation Hardware

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching