Yakima Rocketbox Pro 14 on 2014 Toyota Highlander

Question

Question:

Do you know if the Rocketbox Pro 14 will fit on the factory crossbars of the 2014 Toyota Highlander? Yakima does not have the 2014 Highlander listed on their fit guide. Thanks!

asked by: Amy

1

Helpful Expert Reply:

Before you attempt to install a roof cargo box on your 2014 Toyota Highlander you will want to consult the owners manual to determine what the weight capacity of the roof is and if there are any restrictions on carrying cargo up there. Thule and Yakima do not list any fits for your vehicle with factory crossbars so most likely the bars don't have the capacity or are too big for accessories to fit.

The Yakima RocketBox Pro 14 Rooftop Cargo Box # Y07192 that you referenced will fit on roof racks that have crossbars spreads of 24-40 inches and bar widths that are less than 3-1/8 inches. If your roof rack fits those dimensions and there are not restrictions in your owners manual on cargo boxes this box would technically fit.

See review video.

expert reply by: Jameson C

1

Answer 1

If your Highlander has the factory crossbars, Yakima tells me that you will have rear hatch clearance. If you wish to confirm this for yourself, or if you have aftermarket crossbars, first slide the front crossbar all the way forward if it is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 6

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Yakima Rocketbox Pro 14 on 2014 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching