Fascia Re-Installation After Installing Draw-Tite 75528 on 2013 Buick Enclave
Question:
I want to add a hitch to my 2013 Buick Enclave but I want to be able to reuse the hidden fascia cover on the rear bumper. Do you offer any hitches that you can confirm this can be reused as a standard GM hitch would allow? Thanks.
asked by: Ryan
Expert Reply:
We offer two brands of 2-inch Class III trailer hitch for your 2013 Buick Enclave and both will install in the same spot on the vehicle's frame. Both hitches can be seen on the link provided; both share the same installation note that the fascia door panel must be removed for hitch installation and possibly cannot be reattached. We do not offer any hitch that avoids this potential requirement. You may be able to trim this panel satisfactorily in order to re-install it.
Of the three hitches offered I suggest the Draw-Tite # 75528 for its higher tongue weight capacity of 750-lbs (versus 500-lbs for the Curt hitch # 13424 you referenced. I've linked an installation video for your review.
If you need a trailer wiring harness for towing you can use the plug-and-play kit from Curt, part # C56245. For a handy towing kit you might consider the etrailer.com Ball Mount Kit # 989900.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Replacement Brake Shoes for Dexter Hydraulic 12-1/4 Inch x 4 Inch Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
- Q&A: How To Install 4-way Trailer Connector In 2021 Toyota Highlander XLE Without Factory Tow Package
- Article: What is Overlanding? How to Start your Overlanding Journey
- Q&A: Cleaning Threads of 2014 Chevy Traverse to Allow Install of Trailer Hitch
- Q&A: Correct Replacement for Glo Brite Marker Lights 118A and 117R
- Article: Brake Controller Installation: Starting from Scratch
- Article: Ram Trailer Tow Prep Package