Will a Tonneau Cover From a Short Bed Chevy Truck fit a Short Bed Ford Truck.

Question

Question:

we have a cover that was on a chevy short bed, and we tried to place it on a ford short bed. We are having some trouble doing that, are they universal on the short beds?

asked by: W B

0

Expert Reply:

Truck bed dimensions vary between brands. A short bed Chevy truck is going to have different dimensions than a short bed Ford truck.

If you follow the link I attached and select the year/make/model of your Ford truck you will see the different tonneau covers that are confirmed to fit your vehicle.

expert reply by: Jameson C

0

Mike

8/8/2020

will a roll and lock tonneau cover from a 2005 gmc sierra fit a 2001 chev silverado

Reply

Jon G.

8/18/2020

Doesn't look like any tonneau cover from a 2005 GMC Sierra will fit a 2001 Chevy Silverado. I'm attaching links to our selections for both that you can filter through though.

Helpful Links

tonn-2001_chevrolet_silverado.htm

tonn-2005_gmc_sierra.htm

Reply

Answer 1

The dimensions of the beds between Ford and Chevy/GMC are different even though you're looking at two 6'-6" beds, with the biggest difference being the widths. Because of this you will not be able to use a tonneau cover…

view full answer...

Answer 2

A tonneau cover that was installed on a 2014 Ford F-150 will not also fit a 2018 Chevy Silverado 1500, even if the bed sizes are the same. The design is different enough between the two truck models that a different tonneau cover and hardware is…

view full answer...

Answer 3

Since the instructions for the Blue Ox SwayPro Weight Distribution #BXW1000 state that any air-ride shock absorbers, air springs, or automatic leveling systems need to be disabled or deflated to the manufacturer's minimum recommended pressure…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Will a Tonneau Cover From a Short Bed Chevy Truck fit a Short Bed Ford Truck.

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching