Bearing Reference Number or Spindle Dimensions Needed to Choose Replacement Hub
Question:
I have a Tritons XT12VR-101 and looking for a complete hub kit for both sides of the axle. Do you have a hub that will fit?
asked by: Adam
0
Expert Reply:
The best way to provide the correct hub for your spindles is to compare the bearing numbers.
Check your existing inner and outer bearings for their reference numbers (see photo). With those numbers, I can recommend the correct idler hub for you.
If you cannot find the bearing number, we can still recommend the correct hub if you supply us with some precise measurements of the bearing and seal surface of your spindle. See picture.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Trailer Hub For An 8" Golf Cart Trailer Wheel
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Wiring Diagrams
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Lights on Trailer are not Working and Fuse is Blown on Curt T-Connector # C5621
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Hub for 2007 BRTR Boat Trailer ABV6217
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Recommended Replacement Hubs For 1950s Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer