Measurements of Hitch Pin Hole Distances on B&W Tow & Stow 3-Ball Mount # BWTS10050B

Question:

Hello- Im looking at purchasing the BandW Tow and Stow Model 12 Tri-Ball unit part #BWTS10050B. I was wondering if by chance you would have the measurement from the center of the rearmost hitch pin hole to the backside of the gusset. I am curious to know if when using the rearmost hitch pin hole, if there is enough clearance between the back of the hitch receiver and the gusset. On my tow vehicle, the distance from the center of the hitch pin hole to the rear of the receiver is 2-5/8. Thanks.

asked by: Matt R

Helpful Expert Reply:

I pulled a sample of the B&W Tow & Stow 3-Ball Mount # BWTS10050B and took the measurements you inquired about. The linked photo will show you the distances from the gusset to the two hitch pin holes. These measure, on the hole centers, 3-inches and 4-1/4-inches from the forward-facing edge of the gusset.

expert reply by: Adam R