Can etrailer 2,000 lb Axle be Flipped
Question:
Can this axle be undermounted or does that change the way the tires ride?
asked by: Kyle A
0
Expert Reply:
The etrailer axle part # e82GR can only be installed in an underslung orientation. Since the axle has a bow to it if you were to flip it the alignment would be way off. You'd have to weld spring seats on the opposite side of the axle with the part # TRSS175 to install the axle as an overslung setup.
expert reply by:
Jameson C
0
Products Referenced in This Question
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 1-3/4 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: TruRyde Trailer Suspension TRSS175 Review
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: camper jacks
- Search Results: trailer jack
- Search Results: stabilizer jacks trailer jack
- Search Results: stabilizer jacks camper jacks
- Video: etrailer Scissor Stabilizer Jacks with Handle Review
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement 61 Inch Axle With 2 Inch Diameter
- Q&A: Number 42 Spindle Recommendation
- Search Results: off road trailer tires
- Q&A: Recommended Hitch for a 2011 Subaru Outback
- Article: How to Measure a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How To Find Correct Replacement Axle for Karavan Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
Kyle A.
3/19/2024
Can you clarify which way underslung is? Does this mean the springs are on top with the axle under?