Recommended Trailer Hub with 1-1/4 Diameter Inner Bearing and 3/4 Diameter Outer Bearing
Question:
i need a trailer hub with a 1 1/4 inner bearing and a 3/4 outer bearing thank you
asked by: John Y
Expert Reply:
To recommend the correct hub drum for your application, I would need to know a little more information.
First I will need to know your current hub bolt pattern. In order to determine your hub drum bolt pattern, you would need to measure center to center on bolts directly across from each other on the circle. If you have an odd number of bolts, measure from the center of any bolt to the point halfway between the two bolts directly across from it on the circle. The first number of your bolt pattern would be the number of bolts your hub has, and the second number would be the center to center diameter between them.
It would also be helpful to know your bearing's industry standard numbers. These are usually lasered onto the back side of the bearing. If you do not see a number, measure the inner and outer diameters of the seal with digit calipers to ensure accuracy.
Next I need to know the part number on your hub seal. You should find the numbers stamped in the rubber part of the seal. If you do not see any numbers, measure the inner and outer diameters of the seal with digit calipers to ensure accuracy.
Last I will need to know the axle weight rating. This information should appear on a sticker or a plate on the axle.
If you could provide me with this information, I would be glad to recommend the correct hub drum application for your needs.
If you take a look at the included link you can see a video demonstrating how to measure for the correct bolt pattern.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: tja~2000~b
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: 17214
- Shop: ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side
- Search Results: am20781
- Search Results: am20353
- Search Results: k71~165~00
- Search Results: k71~166~00
- Search Results: bdb1385
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Travel - 2,000 lbs
- Shop: Dexter Hydraulic Drum Brake Assembly - Free Backing - 12" - Right Hand - 7,000 lbs
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Trailer Wiring
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Shop: Vehicle Tow Bar Brake System
- Shop: Brake Controller
- Q&A: Replacement RV Air Conditioner For Duo Therm Unit 59516.531
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Q&A: Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Shop: Trailer Hitch
- Q&A: Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 168233 Review
- Q&A: Replacement Hub Assembly for Tapered 3/4 spindle
- Q&A: Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 ID
- Article: Most Popular Wheel Bearings
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258BTUC1 Review