Which Trailer Wiring Harness is Correct for 2024 Toyota Corolla Cross Hybrid XSE

Question

Question:

I need a 4-way harness on your 2024 Toyota Corolla Cross Hybrid XSE. I will be hooking it up to a small sailboat trailer. I am kind of confused with all the choices. Can you direct me to the right one for my 2024 Toyota Corolla Cross Hybrid XSE?

asked by: Chuck

0

Expert Reply:

Hey Chuck, since your 2024 Toyota Corolla Cross Hybrid XSE has LED taillights the correct trailer wiring harness is the part # C55ZV. Sorry for any confusion!

expert reply by: Jameson C

0

Answer 1

Yes, the Curt Trailer Hitch Receiver #C64DR is confirmed to fit your 2024 Toyota Corolla Cross. This is custom fit so you will not have to drill into your vehicle frame to install the hitch. I recommend installing the Curt Vehicle Wiring Harness…

view full answer...

Answer 2

Definitely smart to check to get the right wiring harness, and while we can't do anything with VINs, I can tell you there are two options for 4-way harnesses on your 2023 Toyota Corolla Cross Hybrid. The difference is just if your model has LED…

view full answer...

Answer 3

There is a fit for a trailer wiring harness for your 2023 Toyota Corolla Cross hybrid XSE, from Curt: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C39DR I verified directly with Curt for you that this harness is a fit…

view full answer...

Answer 4

Yes, the Curt hitch part #C64DR that you referenced does fit the all wheel drive models of the 2022 Toyota Corolla Cross.

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C64DR for your 2022 Toyota Corolla Cross truly is a Class I hitch with a 2" receiver like you see on the product page. You are correct that Class I hitches typically have a 1-1/4" receiver but it looks like…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Which Trailer Wiring Harness is Correct for 2024 Toyota Corolla Cross Hybrid XSE

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching