Dimensions Of The Bottom Infill for Yakima HD Crossbars # Y01166-LC

Question

Question:

is there an end view of this part and/or dimensions of what the cross section looks like? I have a Yakima Lock-N-Load T-Slot platform and I think this might work, but dont have better pictures, or dimensions to work from.

asked by: Brian

0

Expert Reply:

Hey Brian, I reached out to my contact at Yakima regarding the Bottom Infill # Y01166-LC. Unfortunately, they do not have a dimensional drawing or cross section that they could send. Nor do we have any in stock here so I can't go grab one and measure. What I can tell you is the # Y01166-LC is designed to fit the T-channel on the Yakima HD crossbars, and I have included those dimensions below. The Bottom Infill # Y01166-LC is going to sit about 1/2" higher than the standard infill.

expert reply by: Jesse M

0

Yakima HD Bar T-Slot Dimension
(click to enlarge)

Answer 1

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions so either will fit in the other but the profile of the…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

The best way to reduce wind noise on a roof rack like what you have is with a fairing like the Yakima part #Y05018 that you referenced. What's really great about this fairing is that unlike other options that are roof rack specific this one has…

view full answer...

Answer 4

The Yakima JetStream Roof Rack will work well on your 2012 F-150 SuperCrew. This roof rack includes the JetStream crossbars #Y00426, BaseLine towers #Y28TR, and fit kit #Y06168 designed for your F-150. To help cut down on the wind noise I recommend a…

view full answer...

Answer 5

The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars #Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars #Y01158. The Replacement Top Infill #Y01166 is the Yakima part number 8001166 which fits both…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 9

A 2023 Chevy Silverado 1500 will need to have 4WD and a two-speed transfer case, which will need to be placed in neutral, in order to safely flat tow. Your owner's manual will have a list of instructions to follow to switch your transfer case…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 12

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Dimensions Of The Bottom Infill for Yakima HD Crossbars # Y01166-LC

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching