How to Find Correct 4 on 4 Replacement Hub
Question:
I need help ing the proper trailer hub. It’s 4 on 4, no cotter pin. Axle has a flat spot and a grease fitting on the end. It uses a retainer clip. Thanks.
asked by: Jeff B
Expert Reply:
The correct replacement hub will depend on your bearings. All of our 4 on 4 hubs use a # L44643 inner and outer bearing or # L44649 inner and outer bearing. You will need to look for part numbers on your existing bearings or measure the inner diameter. You could also measure the spindle where the bearings ride. If you have L44643 bearings (1" inner diameter) you can use # AKIHUB-440-2-EZ-1K and for L44649 (1.063" ID) you can use # AKIHUB-440-2-EZ-2K.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: grease gun
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Q&A: Wire Gauge and Wire Colors for LED Combination Tail Light Kit TLL56RK
- Search Results: super lube
- Q&A: Could Zerk Fitting be Added to Trailer Spindle to Make it an EZ Lube Spindle
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Add Grease to Super Lube Trailer Hub with Rear Grease Zerk Fitting
- Q&A: Axle Upgrade For Ironton 5 X 8 Utility Trailer
- Search Results: 44649
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 68149
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Titan Trailer Brakes T2385200 Review
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: dust cap
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Shop: Gooseneck Hitch
- Search Results: 44610
- Article: Testing Trailer Brake Magnets for Proper Function