Trailer Hitch that Fits 2020 Honda Fit Sport
Question:
Hello, I have a 2020 Honda Fit Sport and want to confirm the following: - The Sport trim has a rear bumper diffuser thats an added piece from the other trims, I only see 1 review for the Drawtite where someone installed it. Can you confirm that both the Curt C11406 and Draw Tite 24920 fits the Fit Sport trim? - Multiple QandA referenced that Draw Tite has extra bumper and ground clearance, watching your install videos for various Fits from 2015 - 2019 they look to be identical. In the videos it looks to have about 10-11inch ground clearance and 3inch bumper clearance, yet in the QandA the answers indicate the Curt has a much smaller bumper clearance. - I like the look of the Curt but noticed from QandA the Curt hitch requires an extra stabilizing strap, this is only mentioned in the install instructions. I dont see a stabilizing strap on any of the customer posted photos for the Curt. Is it due to failures that Curt started recommending it? That will all push me to DrawTite for not having to use a strap. - Does a hitch cover/cap come with either hitch? Thank you!
asked by: Barry
Expert Reply:
Hey Barry, we can confirm that both the Draw Tite part # 24920 and the Curt # C11406 are a confirmed fit for your 2020 Honda Fit Sport. I also would prefer the Curt so that would be what I would go with. Back in the day the used to require a stabilizer strap when carrying non-supported loads like bike racks but they got rid of that requirement so you do not need to worry about that.
Neither hitch comes with a hitch cover but we do have the Curt # C22271 that would fit the hitch and work great.
Ground clearance between the two is going to be basically the exact same.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which is Better Curt or Draw Tite Hitch for 2017 Honda Fit
- Q&A: Curt or Draw-Tite Trailer Hitch For 2020 Honda Fit
- Q&A: Can I Put A Roof Tent On A 2020 Toyota Corolla Hatchback With A Naked Roof?
- Q&A: Can You Use Other Battery for Curt T-Connector Vehicle Wiring Harness On 2018 Ram ProMaster 2500
- Q&A: Adding Cargo to a 2015 Honda Fit
- Q&A: Does Draw Tite Hitch 24920 Fit 2015 Honda Fit and Who Could Install It
- Article: How to Install a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
Barry
2/13/2024
Hi Jameson, thank you for clarifying on the hitches. Can you please comment on the bumper clearance? In the Q&A the staff answered that Curt has only a 0.5" distance to bumper (from center of pin hole to edge of bumper) while the Draw Tite has a 3" distance. But in the install videos they look to be virtually identical. Thanks again!