Are Jensen AWM968 and Jensen JWM60A 20-Pin Plugs the Same

Question

Question:

is the jmw62a a direct replacement plug and play for awm968

asked by: Mark S

0

Expert Reply:

The plug that fits the back of the Jensen RV Stereo w DVD Player # JWM60A is the same one used for the Jensen AWM968, yes.

There is one exception though and that's with the #8 pin. For the AWM968 it's labeled as accessory/ignition while the JWM60A lists it out as N/A so that won't come with the plug for the new stereo.

Attached are photos of the pinouts for each that you can reference.

expert reply by: Jon G

0

AWM968 Pinout
(click to enlarge)

JWM60A Pinout
(click to enlarge)

Answer 1

I recommend using the Equal-i-zer Weight Distribution System #EQ37100ET over the Blue Ox SwayPro #BXW1000 on your 2023 Grand Design Imagine 2400BH. The Equal-i-zer uses a patented system that has proven itself to work for decades. It still…

view full answer...

Answer 2

Hi Joe, I was able to get my hands on the Curt Custom Base Plate Kit #C68FR and found the distance from the center of the mounting holes down to the crosstube to be a half inch longer.

view full answer...

Answer 3

Hey George thanks for your question. The Carr Transit Step #CARR451001 is confirmed to fit the 2015-2023 Ford Transit T350. We have not had the chance to confirm fitment for the 2024 model quite yet, so while it is not guaranteed, the Carr Transit…

view full answer...

Answer 4

That was enough information right there. If it is welded to the axle a modern replacement won't work. Unless you can find parts at a scrap yard you won't be able to get replacement parts for those brakes to rebuild them either. You…

view full answer...

Answer 5

Thank you for the images Barb, but you are going to have to take a couple measurements to verify what is going to work best for your exact situation. It looks like you have a 2019 Toyota Tundra with the B&W Turnoverball Underbed Gooseneck Trailer…

view full answer...

Answer 6

Good question. The Large Storage Bins #LC175725 and the Small Storage Bins #LC131633 do have the same dimensions as far as height and width, so technically the Underchassis Double Bin #LC175180 could accommodate one of the larger bins. My only…

view full answer...

Answer 7

The closest video we have of the Curt Trailer Hitch Receiver #C13269 on a 2023 Jeep Renegade is the linked video of the hitch on a 2022 Renegade. You can check out the video as well as the photo of the Curt hitch installed as a reference.

view full answer...

Answer 8

Hi Dave, The etrailer Invisible Base Plate Kit #e98948 and Blue Ox Base Plate Kit #BLU53FR are designed slightly different, but both are compatible fits for your 2023 Jeep Gladiator. The #e98948 is going to be an easier installation since you…

view full answer...

Answer 9

Hey Darin, The A24189 part number unfortunately isn't coming back to anything so you would need to measure the inner diameter of the hub where the seal sits to determine the correct replacement. The only grease seal we currently offer with a…

view full answer...

Answer 10

The black wire at the top of the Replacement Circuit Board for HappiJac Electric Truck Camper Jack Systems #LC733513 is the antenna wire, not the ground wire. If it's broken off, then you'll need to replace the entire circuit board because…

view full answer...

Answer 11

Hi John, From what I can see on the Cognito kits the leaf spring stack is just getting a spacer block and new u-bolts so you'll be able to install the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-HD. This just clamps to one…

view full answer...

Answer 12

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT93MR will fit your 2023 Ford Bronco Sport. This is a class III hitch with a maximum GTW of 3,500 lbs, a maximum tongue weight of 350 lbs, and includes all the hardware needed for install.

view full answer...

Are Jensen AWM968 and Jensen JWM60A 20-Pin Plugs the Same

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching