Is There A Sliding Fifth Wheel Hitch That Can Be Transferred From A Ford F-150 To A F-250?
Question:
Is there a sliding 5th wheel hitch that will work in a F150 and can be transferred to a F250 at a later date?
asked by: Barry
Expert Reply:
Yes there is. The Demco Autoslide 5th Wheel Trailer Hitch # DM8550034 is one option that could potentially be used in a Ford F-150 or F-250. This hitch is made to work with the industry standard fifth wheel rails, so provided both trucks have standard fifth wheel rails in the bed, the hitch will be transferrable.
That said, if both trucks do have the industry standard fifth wheel rails in the bed, pretty much any sliding 5th wheel hitch would be transferrable. As long as the hitch is made to fit the industry standard rails that is. So you could potentially go with another brand of hitch such as Curt or Reese.
The Demco Autoslide # DM8550034 is what I recommend though. The hitch is rated for 18K. Demco hitches are all very well-built, and made here in the USA. The autoslide feature is such a huge convenience. No more getting in and out of the truck to operate the slider. Also, no more guessing if you should even be using the slider or not. Overall, it is a big time saver as well, especially if you plan to tow frequently, or if you will be going through tighter areas where the slider will be needed. The only real downside of the autoslide hitch is the weight - around 300 lbs.
You did not mention what year of Ford truck you are working with. If you want to set it up with a rail kit, send me the year and bed size and I am happy to make a recommendation. For example the Demco Rail Kit # DM8552028-71 which will fit Ford F-150 2015-2023. If this is not what you have just let me know.
Products Referenced in This Question
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 16-1/2 - 19-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Demco
more information >
Product Page this Question was Asked From
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 13,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 3250 lbs Vertical Load
- 13000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 15-1/4 - 18 Inch Tall
- 22-1/2 Inch Fore/Aft Travel
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Are Capture Plates Needed When Using the Demco Autoslide With a Lippert Road Armor Pin Box
- Q&A: Trailer Hitch for a 2015 Honda Pilot
- Q&A: Parts Needed to Tow a Trailer with a 2015 Honda Pilot
- Q&A: Installation of Hitch on Fifth Wheel Trailer
- Q&A: When Flat Towing a Vehicle How Much Tongue Weight is on the Trailer Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)