Cushioned Equalizer Recommendation to Replace 6 inch Equalizer
Question:
I measured my equalizers and the distance is 6 inches from center of bolts. Will this be ok for the Alltrek 4000? Which Alltrek is the correct one standard or heavy? Or is the CRE3000 better to use? Which bolt and shackle kit is correct? Again, my axle spacing is just over 31 inch and the leaf springs are 24inch I attached a photo.
asked by: Curtis
Expert Reply:
Yes, the MORryde ALLTREK 4000 part # MR89DR is correct based on your dimensions. The ALLTREK provides best cushioning vertically and horizontally so it would be your best overall option. It would perform better than the CRE3000.
You'd want to go with the longer shackle kit part # MR76ZR.
The reason your wheelbase is a little shorter is due to your leaf springs being a little shorter than most. Typical size is like 25-1/8 inch or 26 inch.
Products Referenced in This Question
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 3-1/8 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Continue Researching
- Q&A: MORryde Wet Bolts and Crossmembers Compatible With ALLTREK 4000 Tandem Axle Trailer Equalizers
- Q&A: How To Select The Correct MORryde AllTrek Equalizer For a Tandem Axle Trailer
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Video: MORryde ALLTREK 4000 Shock Absorbing Equalizers Installation - 2020 Keystone Montana Fifth Wheel
- Video: MORryde ALLTREK 4000 Tandem Axle Trailers Shock Absorbing Equalizers Review
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: 28~5
- Search Results: mr46zr
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Review of MORryde X-Factor Crossmember For Standard Frame Hangers - MR33WR
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Shop: Progressive Dynamics 9100 Inteli-Power Lithium Converter Charger - 24V - 40A
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: equalizer
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: 44649
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Review of MORryde Trailer Leaf Spring Suspension - Shackle Links - MR58ZR
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: 68149
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355