Can A Pace Edwards Contractor Rig Ladder Rack Be Installed Without A Tonneau Cover

Question

Question:

Part number 311-CR6007 pace Edwards ladder stand 1996 ford f350 extended cab/8ft bed I was wondering if you can attached this part onto the bed with like a clamp style similar to like Thule ladder stands. Or will you have to have the bed cover in order for this part to attach to the bed of the truck.

asked by: Michael H

0

Expert Reply:

Hi Mike,

The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR6007 mounts into the track of the cover so from the manufacturer's standpoint you would need the cover in order to use the rack. There aren't currently any clamps designed to work with this rack so if you really wanted to use it without the cover you'd have to custom make them yourself.

If you would like to get a cover to mount the rack to then you'll need the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # 311-JEF1290.

expert reply by: Kevin C

0

Answer 1

I recommend the RetraxONE XR Hard Tonneau Cover #RTX72GR for your 2024 Ford F-150. This is one of my favorite tonneau covers as it is constructed using matte black polycarbonate slats which are not going to scratch like aluminum painted tops or fade…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between these Pace Edwards contractor racks is simply just fitment. The bed width can vary depending on the year/make/model of the vehicle so each of these will only fit specific vehicles. Since you have a 1996 Ford F-250/350 listed as…

view full answer...

Answer 4

Pace Edwards does have a Contractor's Rig Rack that fits your 2019 Ford F150, but the #311-CR6008 isn't a fit. The correct fit for your F150 would be part #311-CR3009. The ladder rack attaches to the vehicle using the Pace Edwards Explorer…

view full answer...

Answer 5

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 6

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 7

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Answer 8

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 9

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

From your question it sounds to me like someone has cut off the tow package plug on your 2005 Ford F-150 and wired in a 4-way connector. In this case you could use the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole, #37185 which will give you a 4-way…

view full answer...

Answer 12

Yes, to both of your questions! The Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails - Aluminum item #MNT29FR is confirmed to fit the 2021 Chevy Silverado 1500's with a 6-1/2' bed. It is also compatible with the…

view full answer...

Can A Pace Edwards Contractor Rig Ladder Rack Be Installed Without A Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching