Does Redline Trailer Bearing Grease Seal # 29031 Include a Spring
Question:
does this seal have the inner spring in it as mine does. cant tell by picture. thanks.1950 parkhurst trailer 5200 lbs axle 3inch o/d x 1.86 inch axle seal o/d on axle x .50inch thick 1/2inch 6 bolt hub
asked by: Dave
Expert Reply:
The Redline Trailer Bearing Grease Seal # 29031 that you referenced does not include a spring. This single-lip seal is for use in the inside end of a trailer hub (the side closest to the axle and furthest from the spindle).
I think the part with a spring that you are referring to is a special type of outer grease cap (not an inner grease seal) called a Bearing Buddy. These mount on the outside end of the trailer hub/spindle in place of a standard closed grease cap. They hold a supply of grease that is forced into the hub when needed by the spring pressure.
Bearing Buddies can be selected by precisely measuring the hub bore with a digital caliper, then matching the Bearing Buddy by its matching outer diameter. The link provided will take you to our main page for all sizes; you can select a set based on your measured hub bore. For example, part # BB1810 fits a hub bore of 1.810 inches. The linked article on bearings may be helpful.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1810 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.810 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.875 Inch I.D.
- 3.000 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Possible Replacement for Trostel 300-156-6 Seal
- Q&A: Bearings For Older Trailer Hub 22834
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Article: How Much Does a Boat and Trailer Weigh?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Does the Pipe Mount BDPG9810-00 and Trailer Jack TJDP-7000S-B Have Same Pipe Dimensions
- Q&A: Replacement Rod and Nut for a Bulldog 12,000 lb Trailer Jack
- Q&A: Will the 6 on 5-1/2 Kodiak 12" Rotor item # KR12S Replace a 12” UFP Brake Rotor?
- Article: Trailer Maintenance Schedule
- Article: Best Bike Racks for Electric Bikes
- Q&A: Old Trailer has 2 Different Sized Spindles and Obsolete Bearing and Seal Numbers