Replacement Antenna for a Voyager WVOM541AP

Question

Question:

Looking for antenna for WVOM541AP Voyager monitor, with backup camera.

asked by: C J

1

Helpful Expert Reply:

For your Voyager WVOM541AP monitor you're going to need the Replacement Antenna for Voyager WiSight Wireless RV Backup Camera System # VO54FR.

expert reply by: Bryce D

1

Answer 1

The correct replacement antenna for a Voyager WVOS541 is the Replacement Wireless Antenna for Voyager Backup Camera System #PXXHD0006301R.

view full answer...

Answer 2

We have the TorkLift Cannon Hitch Extension for 3" Ford Super Duty Factory Hitch #TLE1642. You will not be able to use an extension of this length with a rise hitch adapter. This is because the 42" hitch extender has to be secured…

view full answer...

Answer 3

Based on all of the information I was able to find on your 2018 Ram 3500 DRW with the max tow package your truck should have a 2-1/2" trailer hitch receiver. For a 2-1/2" receiver you will need the Curt Hitch Extension and Reducer…

view full answer...

Answer 4

The replacement antenna for the Voyager WiSight Wireless RV Backup Camera Monitor #WVOM541AP is part #VO54FR on our site. If you're looking for the replacement antenna for the camera #WVCMS130AP instead then that would be part #PXXHD0006301R…

view full answer...

Answer 5

The kit you have now is the original WiSight which we do not have a replacement antenna for.

view full answer...

Answer 6

So over time a trailer leaf spring will stretch out slightly as it tends to flatten out. This means that when you measure your old springs you want to typically go with a new spring that's just slightly shorter to accommodate this. So if you have…

view full answer...

Answer 7

We don't have any cross-reference for that part number. Based on your measurements, I can make an educated guess as to the replacement for a double eye spring. When measuring leaf springs, you measure straight across, not along the curve, so your…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Replacement Antenna for a Voyager WVOM541AP

Product Page this Question was Asked From

Continue Researching