Recommended Rear Sway Bar for a 2024 Chevy Silverado 3500

Question

Question:

I am looking for a rear sway bar. Will this fit my 2024 Chevy Silverado 3500?

asked by: Jason M

0

Expert Reply:

Yes, the Hellwig Adjustable Rear Anti-Sway Bar item # HE66XR is confirmed to fit your 2024 Chevy Silverado 3500. This will minimize lateral movement in your rear end and improve stability. You will really notice this installed when you are going over uneven roads or making turns.

This sway bar is made in the USA and includes everything needed to install on your Silverado.

expert reply by: Jerred H

0

Answer 1

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability. This sway bar is made in the USA…

view full answer...

Answer 2

To add a rear anti-sway to your 2024 Chevy Silverado 3500, I recommend the Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR. This sway bar is custom fit and bolts to your Silverado with included hardware. The bar itself is 1-5/16"…

view full answer...

Answer 3

Yes, the Roadmaster Rear Anti-Sway Bar item #RM25FR is confirmed to fit your 2023 Chevy Silverado 3500. This will minimize lateral movement in your rear end and improve stability. You will really notice this installed when you are going over uneven…

view full answer...

Answer 4

The TorkLift StableLoad Suspension Upgrade #TLA7202 is a great option for your 2019 GMC Sierra 3500 as it is designed for trucks that have factory leaf springs and an upper overload spring. The StableLoad Suspension Upgrade is going to help reduce…

view full answer...

Answer 5

The links that come with the Roadmaster Rear Anti-Sway Bar #RM25FR measure 13" long so if that's what your friend received then nothing has changed as of yet (July 2023) with this specific kit. My contact at Roadmaster did say that shorter…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Recommended Rear Sway Bar for a 2024 Chevy Silverado 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching