Recommended Sliding Ladder Rack for a 2024 Ram 2500 w/ a 6-1/2 Foot Bed and No Ramboxes

Question

Question:

I need a sliding ladder rack for my 2024 Ram 2500 with the short 6-1/2 foot bed. I do not have the ramboxes. Thank you

asked by: Tonya

0

Expert Reply:

We have two options for sliding ladder racks that fit a 2024 Ram 2500 with the shorter 6-1/2' bed. It is important that you do not have the Ramboxes because neither will fit if you do.

Both ladder racks have a 1,250 lbs capacity and install by attaching to your truck's side pockets. The only difference is one of them has a cantilever section that hangs over your Ram's cab for extra storage room. I have listed both options below:

With Cantilever - Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43003XT-501EX

Without Cantilever - Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43003XT-501

expert reply by: Jerred H

0

Answer 1

The Thule TracRac SR #TH43003XT-510 that you referenced is a fit for various Ford Super Duty pickups but you can get the Thule TracRac SR part #TH43003XT-501 instead which will fit your 2006 Dodge Ram 1500 with the 6-1/2' bed.

view full answer...

Answer 2

Are you using the T-plate as well with the rubber block and bolt? It sounds like maybe that's the missing component. If you check out the video that I've included linked to this answer it gives you a decent idea of how everything mounts.…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Recommended Sliding Ladder Rack for a 2024 Ram 2500 w/ a 6-1/2 Foot Bed and No Ramboxes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching