Recommended Suspension Enhancement for 2024 Ford Bronco

Question

Question:

I want to add something to support the suspension in my 2024 Bronco. What would be the best option?

asked by: Braden

0

Expert Reply:

The best suspension enhancement for your 2024 Ford Bronco is the SumoSprings Custom Helper Springs # SS36EV. These will keep your vehicle level when towing and hauling. They also help absorb bumps from the road and reduce sway. The SumoSprings have a 1,500 lb capacity, are maintenance free, and come with a limited lifetime warranty. Keep in mind, these do not fit Raptor or Wildtrak Models, or any model with the Sasquatch package.

expert reply by: Robin H

0

Answer 1

Yes, the SumoSprings Custom Helper Springs #SS56EV will fit your 2021 Bronco. The Badlands trim with the Sasquatch package will not interfere with the installation. These work for both the 2WD and 4WD models and have a 1,000 lb weight capacity. They…

view full answer...

Answer 2

In order to find the correct bearings, you'll need to remove a hub and read the reference numbers off the inner and outer wheel bearings. If you cannot read the reference numbers, use a digital caliper and measure the inside diameter of the inner…

view full answer...

Answer 3

The distance between the left and right mounting holes on the back of the Camco Wave 6 heater, part #CAM673541 is 9.65 inches.

view full answer...

Answer 4

The SumoSprings Custom Helper Springs #SS36EV are designed around the OEM suspension on a 2021 Ford Bronco, although they do come with two 1/2" spacers you can use if desired. If the lift kit raises the suspension on your Bronco and not just the…

view full answer...

Answer 5

Yes, we have the SumoSprings Custom Helper Springs for your 2023 Ford Bronco. These are available in either a 1,000LB #SS56EV or a 1,500LB #SS36EV capacity. This capacity is the amount of weight capacity on the springs at 50% compression. The lighter…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Recommended Suspension Enhancement for 2024 Ford Bronco

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching