Can Flat Towed Vehicle with Separate Turn Signals be Wired as Combined
Question:
I asked this before but the answer was not clear to me. My Mini dingy has combined stop and running lights in one bulb. The turn signals are completely separate bulbs Will a flat four wire plug set up work if I just tap into the brake light wires knowing the running lights will not work? I never drive at night so not worried about no running lights but for sure want stop lights Your previous answer was about if the turn signals and brakes were both on one bulb which is not the case here
asked by: Ron W
Expert Reply:
Tow bar lighting solutions like the Roadmaster kit part # RM-15267 that wire the vehicle as a combined setup can be installed on vehicles that have separate setups. The kit would install on the stoplights that also have the running light function since regardless of combined or separate those two circuits at least are always on the same bulbs.
So you can install the Roadmaster kit on your setup and the stoplights, turn signals, and running lights will all still function.
Product Page this Question was Asked From
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Video: Roadmaster Automatic Battery Disconnect Installation - 2023 Chevrolet Silverado 1500
- Video: Review of Roadmaster Tow Bar Wiring - Battery Disconnect - RM-766
- Article: Diode Installation Instructions for a Dinghy with Separate Tail Light Wiring
- Shop: Roadmaster Hy-Power Diodes (Qty 4)
- Shop: Roadmaster Hy-Power Diode - (Qty 1)
- Shop: Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
- Q&A: Recommended Flat Towing Equipment For A 2015 Chevy Silverado 1500 Z71 4x4
- Q&A: Will Blue Ox Base Plate Kit Fit on 2023 Chevy Silverado 1500 Trail Boss Z71 Trail Boss
- Shop: Vehicle Tow Bar Brake System
- Shop: Brake Buddy Classic 3 Portable Flat Tow Brake System - Preset
- Q&A: Does The Brake Buddy Classic 3 Require Splicing Into Towed Vehicle's Brake Light Wiring
- Q&A: Can the Input on the RoadMaster Diodes be Reversed
- Search Results: hm39494
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Shop: Roadmaster Stop Light Switch Kit
- Video: Roadmaster Universal Diode Wiring Kit Installation - 2023 Chevrolet Silverado 1500
- Video: Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2017 Honda Fit
- Video: Roadmaster 4-Diode Universal Wiring Kit Installation - 2013 Honda Fit
- Video: Roadmaster Universal Diode Wiring Kit Review RM-15267
- Q&A: Tow Bar Wiring Kit Recommendation for 1996 GEO Tracker with Separate Turn Signals from Stoplights
- Q&A: Best Supplemental Braking System for 2013 Honda Fit Towed by Motorhome With Hydraulic Brakes
- Shop: Base Plate for Tow Bar
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Video: Roadmaster Tow Bar Wiring - Splices into Vehicle Wiring - RM-15267 Review
- Shop: Trailer Hitch
- Q&A: What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250
- Shop: Trailer Wiring