Can A 2014 Grand Design Reflection 303rls Rear Bumper Support An etrailer RV Bumper Cargo Carrier

Question

Question:

Will my bumper on 2014 Grand Design Reflection 303rls support your product 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs - e99049

asked by: Kathleen C

0

Expert Reply:

You would need to reach out to Grand Design in order to determine the weight capacity of the rear bumper on your 2014 Grand Design Reflection 303rls. That being said, the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 does include support brackets that bolt to the frame and increase stability of the rear bumper.

expert reply by: Kevin C

0

Answer 1

For the Lippert Components flip down version of added storage the #LC243621 is the only option currently available from our supplier. However, we do have other options of RV bumper bike rack/storage available, such as the #S80605 & the #S80600.…

view full answer...

Answer 2

As long as you have a 12 volt power source for the Rampage Radiant Backseat Heater #RA3501 you could install a thermostat switch on the power wire so that it would only come on in a certain temperature range.

view full answer...

Answer 3

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 is a great option for a cargo carrier for use with an RV. It fits 4" x 4" and 4-1/2" x 4" RV bumpers and can hold up to 500 lbs. As long as the bumper on your Grand Design…

view full answer...

Answer 4

The size of the hitch (1-1/4", 2", 2-1/2", and 3") refers to the internal dimensions of the hitch receiver tube. Since Class III hitches are only on 2" receivers, the internal dimensions of your hitch measure 2" x…

view full answer...

Answer 5

I looked up several pictures of 2020 Winnebago Micro Minnie 2108 FBS models and they all have easily enough room for the TorkLift PowerArmor Locking Battery Box #TLA7708R to fit as this was designed to fit campers just like the Micro Minnie. I…

view full answer...

Answer 6

The TorkLift PowerArmor Locking Battery Box #TLA7708R that you referenced is designed to fit trailer frames just like what you have so it should work very well for you. This box is universal in design and can be installed virtually anywhere. The…

view full answer...

Answer 7

There are no laws I am aware of that would prevent you from mounting the TorkLift PowerArmor Locking Battery Box on top of the trailer frame. It would not hurt to contact the local DMV or state highway patrol office to confirm. On a lot of trailers,…

view full answer...

Answer 8

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 9

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Can A 2014 Grand Design Reflection 303rls Rear Bumper Support An etrailer RV Bumper Cargo Carrier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching