Recommended Hitch for a 2024 Alfa Romeo Stelvio

Question

Question:

Will this hitch fit a 2024 Alfa Romeo Stelvio?

asked by: Liz

0

Expert Reply:

Yes, it will unless you have the Quadrifoglio model. The Curt Trailer Hitch iitem # C13391 is confirmed to fit the 2024 Alfa Romeo Stelvio. This hitch is custom fit and bolts to your vehicle with included hardware.

The Curt item # C13391 is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight. I have linked an installation video below to help you get it set up.

If you are planning on towing you will also need a wiring harness item # 118777 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

The Curt #C13391 receiver hanging below the rear fascia is going to most likey prevent the operation of the hands free liftgate. The Draw-Tite #76199 is going to limit the kick area to on either side of the receiver tube. For the least interference…

view full answer...

Answer 2

I spoke to Stealth Hitches about installing #SH54FR on your 2021 Alfa Romeo Stelvio, and it does require trimming as well. I included a picture of what will need to be trimmed as well. Though the receiver portion of the #SH54FR is detachable, these…

view full answer...

Answer 3

The best hitch for a 2023 Alfa Romeo Stelvio is the Draw-Tite item #76199. This hitch is custom fit and bolts to your Alfa with included hardware. This is a class III hitch with a 2" receiver. This hitch has a 4,000 lbs towing capacity and a 600…

view full answer...

Answer 4

The 2020 Alfa Romeo Stelvio (All Models) would be best matched with the Stealth Hitches Hidden Rack Receiver part #SH54FR for bike racks and cargo carriers or the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit part #SH54FRT for trailer…

view full answer...

Answer 5

They're half right. The Stealth #SH54FR Hitch requires that the rear bumper cover be removed to access the rear reinforcement beam. This beam is essentially the rear bumper. This beam is removed and replaced by the hitch, which takes its place…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 9

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Recommended Hitch for a 2024 Alfa Romeo Stelvio

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching