Is the Latest Upgraded Version of the Trailer Valet Swivel Jack part # STC-V211 Available  

It sounds like you are referring to the security bolt which is part 21b in the attached diagram. The security bolt was designed to keep the Trailer Valet part #STC-V211 in place when the device is rotated to the stow position, and as an extra safety…

If you don't see any bolts holding the existing jack onto the trailer frame, it might have been installed by welding it in place. If this is the case, you'd need to grind off the welds, which is something you'd probably need a…

You would have to mount the Trailer Valet #STC-V211 as far forward on the trailer tongue to be able to turn the jack handle without hitting the boat. Since the trailer valet sticks out further than a traditional jack you should not have a problem.

I went out to the warehouse with the writer who wrote the description for the Trailer Valet, #STC-V211, to determine if our stock is the old or new version. I am happy to report that we have the new version. The manufacturer states the following…

The pin that is used on the swivel for the clamp-on bracket is 5/8 inch diameter. I spoke with my contact at Trailer Valet, and they said that they could not recommend altering the way it is mounted for use.

I spoke with my contact at Trailer Valet and found that the Swivel Jack and Trailer Mover #STC-V211 has a ratio of 5 to 1 in high gear and 14 to 1 in low gear. This means that it takes 5 turns of the handle for one revolution of the tire in high gear…

Yes, the handle on the Trailer Valet Swivel Jack and Trailer Mover, part #STC-V211, that you referenced can be turned so the trailer can be steered to make 90 degree turns so you will be able to maneuver your camper into a tight spot. I have included…

Thank you for the photo, it was beneficial in determining that you will be fine using the Trailer Valet 5X Swivel Jack #STC-V211 with your V-Nose trailer. I called Trailer Valet, and they told me that the top crank was roughly 7 inches long. If you…

First off, thanks for the kind words! We appreciate you trusting us with your business! I looked up the Caravan Mover that you referenced and found it to be quite interesting. I wish we carried it or something very similar, but the closest thing we…

The further forward on a trailer the less weight there is. If at all possible, move the Trailer Valet, #STC-V211, as far forward as you can on either side. The OCD in me wants to say put it on the opposite side as the regular jack. A boat trailer…

We have a Trailer Valet set up on a trailer outside so I went out to test it. You can remove the jack and valet part from the mounting bracket that attaches to the trailer. I had to jack it up using the Trailer Valet, slip under a jack stand, and…