Availability of Base Plate Adapter that Works with Ready Brute Elite Tow Bar

Question

Question:

do you offer a base plate adaptor that connects Roadmaster baseplate to Redi Brute Elite that is set up for blueox base plates?

asked by: Terrell W

1

Helpful Expert Reply:

We do not have an adapter for that configuration. We only have one that goes from Blue Ox base plates to Ready Brute Elite tow bar with the part # BX88297.

expert reply by: Jameson C

1

Answer 1

Great question. The only adapter we have that will work with a Ready Brute is the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. This adapter, will work with the tow bar but won't work with the D-rings. You would…

view full answer...

Answer 2

The Rampage Mass Articulation Front Recovery Bumper for Jeep #RA88509 would be a compatible fit for your 2023 Jeep Gladiator, but it is not rated for flat-towing so you would need to use a different bumper. Smittybilt offers some models that are…

view full answer...

Answer 3

I do have an option that will allow you to flat tow your 2022 Jeep Wrangler Rubicon. Unfortunately, you will not be able to directly attach a tow bar to the d-rings of the Rampage Mass Articulation Front Recovery Bumper for Jeep - Grille Guard, Light…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Availability of Base Plate Adapter that Works with Ready Brute Elite Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching