BulletProof Adjustable Ball Mount That Can do 3-1/2 inch Drop

Question:

Regarding part# HD206 With this hitch on its lowest setting I’m needing it to have a 1.5” distance from the bottom of the 2” shank to the top of the 2 5/16 ball. If not I’m needing a 2” hitch that has the 1.5” distance from the bottom of the 2” shank to the top of a 2 5/16 ball for correct ride height. Looking for 16k to 22k lbs capacity if possible. Thank you.

asked by: Michael M

Expert Reply:

In the traditional way of measuring rise/drop the BulletProof 2-Ball Mount part # HD206 can do a drop of up to 7-1/4 inches. This would be measured from the top of the hitch opening/ball mount shank down to the base of where the hitch ball sits on the ball mount platform. So using the dimension you mentioned the standard drop dimension you would need is 3-1/2 inches. The # HD206 can do the drop you need but not in it's lowest setting.

For a version of this that is closer to what you are looking for the part # BPH64FR can do a drop of 4-1/4 inches when in it's lowest position.

expert reply by: Jameson C