How Does 2023 Ford F-350 Super Duty Pace Edwards Switchblade Retractable Hard Tonneau Cover Lock

Question

Question:

How does this cover lock so that no one can open it from above? I do not see anything in the pictures showing a locking mechanism.

asked by: Angel R

0

Expert Reply:

When the Pace Edwards Switchblade Retractable Hard Tonneau Cover # PE66QJ is completely closed it will be latched in place and the latch is only accessible with the tailgate down. When you lock your 2023 Ford F-350 Super Duty tailgate the cover will be locked and someone will have to break in to get at any cargo in your truck bed.

If you're wanting a tonneau cover that can be locked anywhere along the rails then the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # PE59QJ will be better suited for you. It has a lock at the back of the retractable part of the cover that allows you to secure the cover at any point along to rails to accommodate for different load sizes. When completely closed and locked in conjunction with your locked tailgate it will keep your cargo secure and force someone to break into it to gain access to your truck bed.

expert reply by: Jon G

0

Answer 1

I would stick with a roll-up tonneau cover. A tri-fold option may not be able to access your 5th wheel hitch without folding it completely. A roll-up tonneau cover, or retractable, is preferable because you can still access the B&W 5th wheel…

view full answer...

Answer 2

Pace Edwards only has their fitments listed up to 2022 so I recommend reaching out to your local Ford dealership to determine if there were any changes to beds between 2022 and 2023. If not, then the Pace Edwards Switchblade Retractable Hard Tonneau…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 5

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

How Does 2023 Ford F-350 Super Duty Pace Edwards Switchblade Retractable Hard Tonneau Cover Lock

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching