Loading Ramp For Kuat Piston Pro Bike Rack

Question

Question:

is there a loading ramp for the Kuat Piston Pro Bike Rack for 2 inch hitches?

asked by: Joey

0

Expert Reply:

There is a ramp you can use with the Piston Pro bike rack, with the part numbers for the rack and ramp being the following:

- Kuat Piston Pro Bike Rack for 2 Bikes - 2" Hitches # KU76ZR

- Loading Ramp # KU63VR

expert reply by: Kyle S

0

Answer 1

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 2

We recently had a the Saris representative on-site and one of my questions was about carrying bikes with fenders on a hitch bike rack with carbon framed bikes. He relayed his own experience with the same problem. He said the Saris MHS Modular Bike…

view full answer...

Answer 3

The Saris MHS Bike Rack for 2 Bikes item #SAR73MR is a modular system that in its current configuration has a maximum capacity of 120 lbs or two bikes weighing up to 60 lbs a piece. You can add the 1-Bike Add-On for Saris MHS Bike Rack item #SAR78MR…

view full answer...

Answer 4

There is indeed a loading ramp for the Kuat Piston Pro X bike rack, and is the following part number: - Loading Ramp for Kuat Piston Pro X Bike Rack #KU63VR The Loading Ramp #KU63VR will fit both the 1-1/4" hitch and 2" hitch versions of…

view full answer...

Answer 5

We carry both the 1 Bike and 2 Bike Add-ons for the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. These can be found as part #KU68VR for the 1 Bike and part #KU78VR for the 2 Bike Add-ons. Attached is a review video for you to check out.

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

We have one option that will work for you. The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ uses inner bearing #L68149 and outer bearing #LM67048 so it would work perfectly on your spindle.…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 12

Hello Jody, There is indeed a bike rack capable of carrying a pair of ebikes and a pair of road bikes at the same time, so long as you have a 2 inch hitch. That said, it really depends on how much your ebikes weigh, but a good option to start with is…

view full answer...

Loading Ramp For Kuat Piston Pro Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching