How Small Does the 5' Tall Telesteps Folding Ladder Fold Up To

Question

Question:

How small is this ladder when it's folded up all the way?

asked by: Eli

0

Expert Reply:

The Telesteps Folding Ladder # TE67FR folds up into a 4" x 4" post for easy and convenient storage. This is a perfect ladder for people with a smaller house, garage, or even to have handy at the campsite!

expert reply by: Jon G

0

Answer 1

The overall length of the Telesteps Folding Ladder #TE67FR when folded is 5'. When folded the width and height are 2-7/8" x 3-1/2".

view full answer...

Answer 2

For a 2023 Entegra Odyssey 24B Class C Motorhome on a Ford E-450 chassis you would need the Hellwig Front Anti-Sway Bar #HE26GR and rear #HE78RR.

view full answer...

Answer 3

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the Roadmaster…

view full answer...

Answer 4

There may be a little play on the bottom of the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes. part #DM76FR, to account for the different machining tolerances, but the top plates should hold it snug and remove the play. I did…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

How Small Does the 5' Tall Telesteps Folding Ladder Fold Up To

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching