Replacement For Firestone Air Compressor 9285

Question

Question:

Hello Etrailer I see that you stock the Firestone 9499 air compressor… I have the 2220 kit and the 9285 pump. Is the 9499 the replacement?

asked by: Todd M

1

Helpful Expert Reply:

Yep, the correct replacement For the Firestone 9285 is indeed the Firestone Heavy Duty Air Compressor # F9499.

expert reply by: Kyle S

1

Answer 1

It sounds like there may be a wiring issue or blown fuse on your Firestone compressor system like the part #F2543. The compressor should only run when the vehicle ignition is on, and even then only if the tank needs air. Check to make sure there…

view full answer...

Answer 2

There are several options for an on-board compressor for your Firestone Ride-Rite Air Helper Springs #F2299. Since you tow your gooseneck every day, I suggest using a heavy-duty compressor. If you would like to be able to level the air springs…

view full answer...

Answer 3

The fuse tap in question for Firestone air bag kits such as #F2581 is #F2526 and it comes with fuses already so you would not have to use your own. The included fuses are a 10 amp, 20 amp, and 30 amp. The fuse tap is used to easily get power to the…

view full answer...

Answer 4

The Firestone Heavy Duty Air Compressor - 150 psi #F9499 works with up to a 3 gallon air tank. I recommend going with the Firestone Air Tank, 3 Gallon - (3) 1/4 NPT Ports, (2) 1/8 NPT Ports #F9245. This operates at a max pressure of 150 psi just as…

view full answer...

Answer 5

Yes, there is a check valve in the brass fitting of the Firestone Heavy Duty Air Compressor #F9499 that you referenced which is designed to prevent air pressure from backfeeding into the head of the compressor.

view full answer...

Answer 6

While we do not have the technical drawings of the Firestone Heavy Duty Air Compressor #F9499 I can tell you the dimensions. This unit measures 8" long, 3.94" wide, is 6.3" tall, and has a maximum PSI of 150 PSI. Additionally, this…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Replacement For Firestone Air Compressor 9285

Product Page this Question was Asked From

Continue Researching