Replacing Bearings On A 2003 Four Winds Boat Trailer
Question:
I need wheel bearings for a 2003 four winns boat trailer. Trailer model # is DO268. GVWR is 9998 lbs. Hub is 6 lug 5-1/2 bolt pattern. Do you carry them? Cannot find on website.
asked by: Bruce H
Expert Reply:
I can certainly point you in the right direction, but I do not have a way to look up bearing specs for a trailer based on a year make and model. If only it were so easy right?
Now since it is a 6 lug hub, and a GVWR just under 10K, you likely are dealing with either 5,200 lb axles, or 6,000 lb axles. These axles can use a few different bearing sizes/combinations. Most commonly it would be a # 25580 (1.75" inner diameter) inner bearing and a # 15123 (1.25" inner diameter) outer bearing. This is fairly standard these days, but since your trailer is about 20 years old, it may not use the same standard bearing sizes. It is always best to verify prior to ordering.
Since it is an older trailer, the best thing to do will be to remove one of the hubs and unpack the bearings. Get the bearing number off of each one, or take measurements with a caliper. This will tell us exactly what bearings you will need.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Replacement Bearings and Seals for Curt 5.2K to 8K Axle
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Recommended Disc Brake Conversion Parts for a 5th Wheel Trailer w/ 8,000 lbs Axles
- Q&A: What are the Dimensions of Curt Hook with Spring Loaded Safety Latch # C81840
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)