Replacement Tarp for an Extang FullTilt Tonneau Cover on a 2012 Dodge Ram 1500 Short Bed

Question

Question:

Will this tarp fit a 2012 Dodge ram 64inch bed?

asked by: Charles S

0

Expert Reply:

The Replacement Tarp for Extang FullTilt SL Soft Tonneau Cover # EX37355 is not the correct replacement tarp for your Extang FullTilt tonneau cover, instead you'd need the Replacement Tarp for Extang FullTilt SL Soft Tonneau Cover # EX37425.

expert reply by: Bryce D

0

Answer 1

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side…

view full answer...

Answer 2

There is a replacement cover that could work for you, but without a part number I would not be able to absolutely guarantee it. Having said that, the Extang FullTilt SL Soft Tonneau Cover - Snapless J-Strip - Hatch Style #EX38645 is a fit for the…

view full answer...

Answer 3

I just spoke with my rep at Extang and he confirmed that the item #EX37560 is the full tilt replacement cover for your 1997 Chevrolet S-10 fleetside truck.

view full answer...

Answer 4

The replacement you're looking for for your Extang FullTilt SL Soft Tonneau Cover part #EX38720 is the Replacement Cover for Extang FullTilt SL Vinyl Tonneau Cover part #EX37720. This one is for the 6 3/4' model versus the 8' model you…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

I would be happy to. To flat tow your 2017 Ford F-250 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Replacement Tarp for an Extang FullTilt Tonneau Cover on a 2012 Dodge Ram 1500 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching