Trailer Hitch Receiver Fit For 2024 Acura MDX

Question

Question:

is there a hitch that fits my 2024 acura mdx

asked by: Sal

0

Expert Reply:

There is indeed a trailer hitch receiver fit for your 2024 Acura MDX, from Curt. I went ahead and verified this fit with the manufacturer for you, and the correct part is the following:

- Curt Trailer Hitch Receiver # C22HR

expert reply by: Kyle S

0

Answer 1

Yes! We do have a hitch for your 2024 Acura MDX to carry your bike rack. - Curt Trailer Hitch Receiver #C22HR The #C22HR trailer hitch is confirmed to fit your MDX and will provide you with a 2" hitch receiver. The 2" receiver is…

view full answer...

Answer 2

Curt Manufacturing lists the #C22HR Class III hitch as a fit for all models of the 2022 Acura MDX. Installation will not require removing the bumper cover. If your spare tire is mounted to a wheel larger than 18 inches in diameter, the spare will…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C22HR can be installed without removing your rear bumper on your 2024 Acura MDX A Spec. I have linked an installation video below so you can see what all is involved with the installation of this receiver. I…

view full answer...

Answer 4

I spoke with Blue Ox who stated that the the inside channel of the Blue Ox Adjustable 2-Ball Mount #BLU75XR is approximately 2" wide. That being said, when you look at the pictures it's clearly about a 1/2" - 1" wider than the…

view full answer...

Answer 5

To lock the Blue Ox Adjustable 2-Ball Mount #BLU75XR to your trailer hitch and the ball mount to the shank section I recommend picking up the Curt Lock Set #C23556. This includes a standard locking hitch pin as well as one that's a bit longer.…

view full answer...

Answer 6

We do have a few options for your 2022 Acura MDX A-Spec, like the Draw-Tite Max-Frame Trailer Hitch Receiver #DT42MR and the Curt Trailer Hitch Receiver #C22HR. Both trailer hitches are rated at the same capacities of 6,000lbs GTW, and 900lbs tongue…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Trailer Hitch Receiver Fit For 2024 Acura MDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching