Replacement Fenders And Brackets For An Older Karavan Trailer

Question

Question:

Hi, I have an older Karavan PWC trailer and the metal fender brackets are broken. Karavan said the are now obsolete. Is there a universal plastic set of fenders I could use?

asked by: Scott L

0

Expert Reply:

I can definitely help point you in the right direction, but we do not offer a universal fender for a Karavan trailer. Fitment mostly depends on the wheel size. Looking at these different Karavan trailers, it appears some models use a plastic fender with a step, and other use just a basic fender with no step.

For example, if you have 12" wheels, a very common fender is the Fulton # F008572. This fender has steps and measures 33-1/2" long, 7-1/2" wide and 8-3/4" tall. This fender will go with the brackets # PF1135-BKT.

We also have basic fenders like the Fulton # F008550. This has no step and measures 20-1/4" long, 7" wide and 6-1/4" tall. These usually go with brackets like the # CE26065PGA We do have these fenders available in other sizes and colors if you have a preference.

When replacing fenders, it is usually easiest to measure the old fender, and try to match it as close as possible. If you want to take some measurements and send them to me directly, I can certainly see what we have for you.

expert reply by: Jesse M

0

Answer 1

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 2

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 3

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 4

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 5

It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…

view full answer...

Answer 6

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in or…

view full answer...

Answer 7

Polyurea is in the wheel bearing grease and is compatible with marine bearing grease but not the Red grease. Red grease is compatible with marine grease but not standard. I attached a help article that has a chart with all of the grease…

view full answer...

Answer 8

For your BBQ smoker trailer you are building, a single 5200 lb axle will work just fine. There are no requirements for single versus tandem axle applications. The biggest thing to consider is the stability of the trailer. I personally would be more…

view full answer...

Answer 9

Yes everything you mentioned would work well together on your 2003 Keystone Cougar 276 with a 33 inch wheelbase. The EZ Flex equalizer kit part #K71-652-00 would give you a more cushioned ride quality than you have now, would work great with the…

view full answer...

Answer 10

First off thank you for your repeated business! Starting with the equalizers I recommend going with the Equa-Flex Cushioned Equalizers #LC279688 which measure 7-1/2" between the two horizontal mounting holes and 4" from the top hole to the…

view full answer...

Answer 11

Assuming that by 4.5 hole, you mean that your hub has a 5 lug on 4-1/2 inch bolt circle, we do indeed have a 14 inch diameter wheel that has a 2.62 (2-5/8) inch diameter pilot hole. The Dexstar 14 x 5-1/2 conventional steel wheel, part #AM20304 would…

view full answer...

Answer 12

The upgraded equalizer kit I recommend for you is the E-Z Flex Heavy Duty Rubber Suspension System part #K71-652-00 which will be an exact fit for the 5-3/4" long equalizers that you have now. The E-Z Flex Heavy Duty Rubber Suspension System are…

view full answer...

Replacement Fenders And Brackets For An Older Karavan Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching