Is Trailer Valet RVR3 Remote Trailer Dolly TVRVR3-BB225 New or Refurbished

Question

Question:

What do you sell the factory refurbished units for? Which fails most often, the power/drive train, or the control/communications systems?

asked by: Mike J

0

Expert Reply:

We do not sell refurbished versions of the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount # TVRVR3-BB225 we only carry the brand new versions. We haven't seen enough failure from these to notice a trend of any of the components failing.

expert reply by: Jameson C

0

Answer 1

I'm sorry to hear that your trailer dolly didn't work out as well as you had hoped. Since you plan to use the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 in areas that aren't always smooth and level, I would like to share…

view full answer...

Answer 2

The weight of the Trailer Valet RVR9 Remote-Controlled Trailer Dolly item #TVRVR9 is 75 lbs.

view full answer...

Answer 3

In order to lower your 4,000 lb trailer down your driveway the only option would be the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5. This dolly can handle a trailer up to 5,500 lbs and 550 lbs of tongue weight. It also works on slopes…

view full answer...

Answer 4

When using the Trailer Valet with a tandem axle trailer it is recommended to use the Trailer Valet Trailer Wheel Dollies #TV56FR under the rear wheels. The dollies will provide you with much better turning radius, as the tires will try and bind up…

view full answer...

Answer 5

The Trailer Valet RVR9 #TVRVR9 is rated for a trailer up to 9,000lbs with a 900lb tongue weight. As long as your 8,000lb trailer does not exceed the tongue weight for this you will be able to move your trailer. We do have the Trailer Valet RVR12…

view full answer...

Answer 6

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 7

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

We do not offer wishbone wiring that has a ground wire going down both sides. You really don't need it because the ground wire is for the plug itself not the lights and you want the ground close to the plug. I recommend using the 4-Way Wishbone…

view full answer...

Answer 11

It sounds like you have a wishbone wiring harness install on your trailer. A regular 4-way wiring harness has 4 wires from the back of the connector, 1 for left turn/brake typically (yellow), 1 for the right turn/brake typically (green), 1 for the…

view full answer...

Answer 12

To replace your JVR9000 I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40. It has slightly different dimensions that can be easily fixed using a dash plate. This won't have a monitor to watch your video feeds from so…

view full answer...

Is Trailer Valet RVR3 Remote Trailer Dolly TVRVR3-BB225 New or Refurbished

Product Page this Question was Asked From

Continue Researching