Recommended Truck Bed Crossbars and Bike Rack for a Full Size Truck

Question

Question:

I need help finding the right bike rack for an ebike weighing 45 lb with the battery removed and for our 2022 Silverado 2500 HD, and not a hitch rack since we will be towing a camper. So were considering adding crossbars over the bed for roof-type bike racks. Is it wise to consider using the stake pockets - do you have compatible rails? The Kuat Piston is rated for over 60 lb. What other bike racks do you suggest?

asked by: Rob H

0

Expert Reply:

I would be happy to help you. There are a few ladder racks that use the stake pockets but for your application there's nothing with that style mounting method.

I recommend the Yakima BedRock HD Truck Bed Rack item # Y01160-59. These crossbars attach similar to a bed liner or camper shell. They use clamps to secure them to your Silverado's bedsides. The included locks will help to prevent theft.

The Kuat Piston item # KU32VR is a great option and would have more than enough capacity for your e-bike. The only concern I would have is if your e-bike has fenders that extend past the 10 o'clock and 2 o'clock position.

For a frame mounted option I have the Thule ProRide XT Roof Bike Rack item # TH598004. It would avoid all contact with the fenders but your bike would need to lose another pound because it tops out at 44 lbs capacity. This is the highest capacity crossbar mounted bike rack we have.

I have linked review videos below for all of these parts I have recommended. If you need any additional help feel free to email me directly.

expert reply by: Jerred H

0

Answer 1

The best hitch for your 1999 Chevy Silverado LS is the Curt Trailer Hitch item #C15323. This is a class V hitch with a 2" receiver. It has a massive 16,000 lbs capacity which will not be overrated for your truck. It fits the 1500 and 2500…

view full answer...

Answer 2

No, but there is one that does so long as your 2017 Honda Civic Coupe doesn't have center exhaust. It is the Curt Trailer Hitch item #C11463. This hitch is custom fit and bolts to your Honda with included hardware. It is also a class I hitch…

view full answer...

Answer 3

Yes, so long as you don't try to use both of them at the same time. The Curt T-Connector Vehicle Wiring Harness item #C55124 will work as a 4-flat connector and plugs into your Jeep's existing wiring. If you try to flat tow your 2018…

view full answer...

Answer 4

Yes, you can but the manufacturer's recommend not mixing up brands of rails and brackets. Depending on how old they are could also make them incompatible with your 2015 Ford F-150. The mounting holes in the rails may not line up with where the…

view full answer...

Answer 5

I checked with Roadmaster and Blue Ox and neither recommended putting in a charge line like item #RM-156-25 when flat towing your 2016 Cadillac SRX. However, I took a look at your owner's manual and it says you have to keep your battery…

view full answer...

Answer 6

6-3/4" from the hitch pin hole to the backside of where the 2" receiver starts and 12-1/2" from the pin hole to the outside edge of the 2" receiver. I have linked a diagram below of the Roadmaster High-Low Adapter for Tow Bars…

view full answer...

Answer 7

For a clamp style e-bike rack you will want the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes item #HLY64FR. This bike rack has padded clamps with hand knobs that will hold your step through bikes securely by the seat post. The cradles can…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Recommended Truck Bed Crossbars and Bike Rack for a Full Size Truck

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching