How to Determine Correct Hub Assembly Based off Bearing Numbers and Spindle Dimensions
Question:
I have a 2008 Aztex utility trailer needing new bearings, Aztec is out of business. I have pulled the hub which has the following ID marks stamped on it: 1 CDC within a circle company? 2 13676-4 and 3 F21102. Does any of this help ID the bearings / races needed? There is no part number on the beaings.
asked by: Tim S
Expert Reply:
You will need to disassemble your hub to get the actual bearing numbers. Unfortunately the numbers you gave me don't help identify anything.
Check out the video I attached that details how to get the bearings out of a hub so that they can be identified. Once we have that info we can pick out the correct hub.
The other option you have is to get exact measurements from spindle. Check out the picture I attached shows what dimensions are needed.
I also will need to know the correct bolt pattern of the wheels on your trailer. I attached an FAQ on this as well.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: 10 60 seal
- Search Results: bt8 spindle
- Search Results: btr spindle
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Q&A: Replacing Spindle on Boat Trailer Using Digital Caliper
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: How to Remove Bearing Races on a Trailer Hub
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Seal Puller
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Search Results: bearing buddy
- Search Results: leaf springs
- Search Results: bearing packer
- Search Results: bearing grease packer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Performance Tool Seal Puller Review
- Video: Bearing Repacking and Grease Seals Installation
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Article: Trailer Wiring Diagrams
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Video: Optronics Trailer Lights - Tail Lights - BUL002CB Review
- Video: Optronics Light Guide LED Oval Trailer Light Installation