Recommended Hitch for a 2023 Mazda 3 Sedan

Question

Question:

Does this hitch fit a 2023 Mazda3 sedan? If so, are installation instructions available so that I can get an idea of whats involved? Thanks

asked by: Ted

0

Expert Reply:

No, it does not. I checked with our vendors and the only hitch that fits a 2023 Mazda 3 sedan is the Draw-Tite Trailer Hitch item # 24982. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.

I have linked the installation instructions below and they are pretty detailed, lots of pictures, so you will get a great idea of what is involved.

If you are planning on towing you will also need a wiring harness item # 118808 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.

The EcoHitch Hidden Trailer Hitch item # EH23VR you were looking at only fits the 2019 - 2020 Mazda 3 sedan.

expert reply by: Jerred H

0

Answer 1

Hey Andrew, so EcoHitch does not like to offer online versions of their instructions, which is pretty annoying, but the hitch definitely does come with a printed set that are easy to follow. The best solution I can offer you right now would be to…

view full answer...

Answer 2

Yes the EcoHitch part #EH23VR is a confirmed fit for your 2021 Mazda 3 sedan.

view full answer...

Answer 3

I would be happy to help you. For your 2020 Mazda 3 Sedan you're going to want the EcoHitch Hidden Trailer Hitch Receiver item #EH23VR. This hitch has a 2" receiver opening and you will not need an adapter to use your bike rack. This hitch…

view full answer...

Answer 4

Hey Luis, yes the EcoHitch part #EH23VR is a confirmed fit for the 2022 Mazda 3 sedan. The info you found is outdated and I sent an update to have it fixed.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

I have a hitch for your 2020 Mazda 3 hatchback but there are no 2" receivers available. At this point I would say there is not going to be one made for it. You can still do some towing with the Curt item #C98BR. This hitch has a 1-1/4"…

view full answer...

Recommended Hitch for a 2023 Mazda 3 Sedan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching